MPO Polishing Solution Solution 1: Pneumatic polishing machine for MPO ferrule polishing Solution Description: 1. Pneumatic center pressure polishing of MPO ferrules; quantitative control of polishing pressure, time and speed; equipped with 24-position MT ferrules fixture; 2. 100% verification test, with a variety of polishing fixtures to be chosen; Ergonomic design, right button to start and left button to stop; Automatic switch to the next polishing step at the end of the previous polishin...

Bare Fiber Polishing Solution Solution 1: 300~1500μm diameter bare fiber polishing Solution Description: 1. Polishing bare fiber with 300-1500μm diameter; 100/200 times magnification, no defect on ferrule end face; can clamp single or multi-core bare fiber. 2. Polishing 200-400 300μm bare fibers once; Z-axis adjustable polishing fixture with 0.01mm stroke accuracy; 3. V-slot or U-slot lateral non-destructive clamping of bare fiber to ensure verticality; provide reliable polishing process fo...

Fiber Optic Polishing Solution

Neofibo has a wide range of fiber optic polishing machines to polish bare fibers, bundles, single core patch cords, MPO patch cords, etc. We can also provide you with a range of polishing solutions if you need them. All patch cord polishing have CE certification.With the features of simple operation, high accuracy, high flexibility, and good consistency, Neofibo’s polishing machine is widely used in fiber optic patch cord production line.

Neofibo Fiber Inspection scope FK4-410P/FK4-210P/FK-410P/FK-210P fiber microscope Inspection scope fiber optic ferrule endface. Available for 1.25mm ferrule and 2.50mm ferrule. Key Features: Full range for horizontal and vertical adjustment(4.0 x 3.0mm). Multi-axial location. High-manification to observe all kinds of connector endface. High definition and resolution. High accuracy to locate ferrule center. Video signal could input to CRT monitor or computer display. Inpecting MTRJ / MT / MPO...

Neofibo Crimping machine is used for assembling fiber optic connectors / ceramic ferrules and fiber optic adapters. Pressure of the machine is adjustable, and it is available for different kinds of fiber optic connectors (Such as FC, ST, SC, MU, LC, E2000, LX.5 and so on).

Fiber optic curing oven is a special equipment to heat and solidify optical fiber, which is widely used for production of optical fiber pigtail , patchcord and bonding for optical fiber. With good performance, it is used for heating and solidifying all types of fiber connectors, such as SC , LC , FC , ST, etc.

Neofibo Epoxy Injecting Machine & Fiber Optic Glue Automatic Epoxy Injecting Machine AEIM-500: Specification: First, the functional characteristics of the introduction: 1, adopt microcomputer automatic control system, easy to operate. 2, unique design of the panel, upload ferrule array could complete once. 3, XYZ axis adopts Japanese dispensing technology, dual rail parallel support, and high transmission precision and stable performance. 4, Japanese motor with America synchronous belt, ...

The machines are mainly powered by compressed air, and the whole operation process is controlled by single chip microcomputer to finish the processing process of peeling, shearing and aramid. So that the original 3 processing procedures to complete the work, on the machine can be easily completed in one step (no skilled workers),Greatly improve the production efficiency, and the product consistency is good.

Neofibo Fiber Optic Cutting Machine is full automatic machine, use to cut the indoor fiber optic cable. It large use in fiber optic patch cable/pigtail production line. In addition of this type of fiber optical cable cutting machine, we also can supply the full automatic of FTTH cable cutting machine also.

Shenzhen Neofibo Technology Limited was founded in 2008, located in Shenzhen China. Neofibo’s aim is to make our customers’ fiber connectivity more reliable. During last 14 years, Neofibo has dedicated to become the professional supplier for fiber optic polishing solutions.

Neofibo is a professional patch cord production team that can produce machines for manufacturing patch cords and provide fiber polishing solutions that conform to your production standards.